Contact us!

Please contact us by using the following telephone numbers or e-mail address.

Telephone
+40 236 33 72 82
+40 236 44 99 10
+40 236 44 99 20
E-mail: office@fierctc.ro
Welcome!

S.C. FIERCTC SIBEL S.R.L. is a young company, founded in 1998, with 100% private capital that focuses it’s efforts to meet the demands of the building materials market.

Metallic roofing systems

Our company offers complete systems for metallic roofs in 3 constructive ranges: RIVA®, DUROTEK® and KARPATIK®. We offer all the necessary information for choosing solutions and products and perform measurements to provide a realistic assessment of costs and execution deadlines.

Roof systems are produced according to the European standards. The base material of the product is hot-dip galvanized steel sheet coated on both sides with at least 225 g Zn/m2. Over the zinc layer a passivation layer of 1 μm is applied followed by a 7 μm layer of primer on both sides. Afterwards, on the lower side is applied a protective varnish of epoxy that has a thickness of 10μm, and on the upper side a layer of silicone polyester 25 μm thick, matte polyester 35 μm thick or 200 μm thick plastisol, as appropriate.

RIVA® metallic roof tiles

The tile panel has 7 creases on the section’s length, with 0.4-0.6 mm thickness, the fold’s height is 24 mm, the crease’s step is 183.5, overall width 1185 mm and 1100 mm usable width.
The 3D pressing and cutting of the tiles gives the same level disposal of four tiles, this way offering a continuity to the roof and a touch of elegance.

DUROTEK® metallic roof tiles

The tile panel has 6 creases on the section’s length, with 0.4-0.6 mm thickness, the crease’s height is 18 mm, the crease’s step is 230 mm, overall width 1220 mm and 1150 mm usable width.

KARPATIK® metallic roof tiles

The tile panel has 6 creases on the section’s length, with 0.4-0.6 mm thickness, the crease’s height is 34 mm, the crease’s step is 210 mm, overall width 1150 mm and 1050 mm usable width.

The tiles are executed with modules of 350 mm or 400 mm in length. Other lengths can be achieved on customer’s request.

The standard tiles are 1 step, 3 steps, 6 steps and 10 steps; the application can be made with a different number of steps but the total length of the tile must not exceed 8 m.

The metallic tiles can be supplied with a protective plastic film that has thickness of 50-60 μm, which protects the paintwork during handling and transportation.

Range of colors For the metallic roof tiles our company offers the following RAL colors:

RAL Glossy - available thickness: 0.40÷0.50 mm
RAL Matte - available thickness: 0.45÷0.50 mm
RAL Matte GRANITE STORM® - available thickness: 0.55÷0.60 mm